- 13 -
2. PREPARING YOUR PHONE FOR USE
2.1 Install the battery
•
Hold the battery and handset for each hand.
•
Fit the battery into the hole at the bottom of back side of the handset.
•
Softly press the top area of battery.
•
You can here the “Click” sound to complete install the battery.
Caution:
To prevent injury or burns. Do not allow metal objects to contact the
battery terminals. Do not disassemble. Use only the original batteries. Must
be disposed of properly.
2.2 Remove the battery
Note:
Switch the phone off before removing the battery!
•
Slide out the hold button at the backside of handset.
•
Place your finger at grooved edge area, and then pull out the battery.
2.3 Charge the battery
①
Connect the lead from the charger to the bottom of the phone.
②
Connect the charger to an AC wall outlet. The battery indicator bar starts to
scroll.
Note:
If the battery is totally empty, it may take a few minutes before the
charging indication appears on the screen.
Tip:
The phone can be used while charging if the phone is switched on.
Note:
Disconnect your phone from the charger if the phone becomes hot during
a call.
③
The battery is fully charged when the battery indicator bar stops scrolling, and
the Battery full text is briefly displayed if the phone is switched on. Charging
time depends on the charger and battery used.
④
Disconnect the charger from the AC outlet and the phone.