- 21 -
②
When the last call time is displayed on the screen, if you press
B A C K
or
, the phone displays standby status on the screen.
③
In standby mode, if you want to see the last call time again, press and hold
for 2 seconds. Then, the phone displays standby the last call time on the
screen for 30 seconds again.
④
Repeat from
②
.
5.4 Answering a call
To answer a phone call:
①
Press any key to answer the call.
to answer the call.
②
Press
to end the call.
5.5 Adjusting the earpiece volume
You can adjust the earpiece volume (while in a call or at any time) by pressing the
scroll keys on the phone.
•
Press
to increase the volume.
•
Press
to decrease the volume.
5.6 Redial the last-dialed number
To redial the last-dialed number on your phone:
Stored numbers may be up to 10 recently dialed numbers. Stored numbers may
be up to 28 digits long.
- 22 -
①
If not there, return to the Start screen by pressing
. Otherwise proceed
to step
②
.
②
Press
two times.
5.7 Use Caller ID
Caller ID is a network service that identifies incoming calls. Contact your service
provider to find out how to get this feature.
When Caller ID is active, your phone shows the caller’s phone number during an
incoming call, as long as this number is a part of your service provider’s wireless
network.
The wireless network lets you know if it doesn’t recognize the calling number. The
wireless network will also let you know if the calling party has blocked the Caller
ID feature.
If you have stored the name and number of the calling party in your phone book
and that number has supported by the wireless network, the caller’s name can
also appear.
