Rev 1.0
(13)
Power supply voltage
DC12 V
±
10% (ripple 50 mV(p-p) or less)
(14)
Power consumption
Approximately 2.8 W
［
Electronic shutter specification
］
(1)
Shutter speed
AE/MANU switching (initial factory setting: MANU)
・
Readout mode
All pixel readout
1/15 to 1/35000 s (1250 levels)
Partial scan
1/30 to 1/35000 s (625 levels)
High-speed draft readout
1/48 to 1/35000 s (313 levels)
(2)
Random trigger shutter
ON/OFF switching (initial factory setting: OFF)
・
Fixed mode
The exposure time depends on the shutter speed setting.
・
Pulse width mode
The exposure time depends on the pulse width.
(3)
Multiple-shutter
ON/OFF switching (initial factory setting: OFF)
Exposure by TRIG input, readout by MULTI input
* Enabled when random trigger shutter is ON.
[Internal sync signal specification]
(1)
Driving frequency
36.000 MHz
(2)
Scanning frequency
・
Readout mode
All pixel readout
Horizontal
:18.750 kHz
Vertical
:15.000
Hz
Partial
scan
Horizontal :18.750
kHz
Vertical
:30.000
Hz
High-speed draft readout
Horizontal
:15.000 kHz
Vertical
:47.293
Hz
［
Input signal specification
］
(1)
TRIG
Camera link I/F and DC IN connector input
・
Signal level (DC IN input)
TTL level
・
Polarity
Positive/Negative polarity switching possible (initial factory setting: Negative)
・
Pulse width
53.3
μ
s or more
(2)
MULTI
Camera link I/F input
・
Polarity
Negative
polarity
・
Pulse width
53.3
μ
s to 10 ms
D4134176A
3
