TG-7 Dual Path Series Installation & Operating Guide
13
56052601 Rev B © 2022 Telguard
Getting Ready
The communicator can only be activated when all necessary accounting information has been
added to the customer database located at the TCC (i.e., the unit has been registered). The
database includes information about the customer account, unit location, and system test plan
information.
Dealer Account Establishment
A Dealer Account must be established prior to registration of any Telguard unit. This can be
accomplished by visiting
and completing the necessary information under
This is a one-time event and an acknowledgment from Telguard Customer Service
will include a Dealer Account Number that will be used for all Telguard Digital registrations.
Telguard units can be registered and activated once the Dealer Account has been established.
Pre-Installation Checklist
Before attempting to connect the communicator to the alarm panel, please make sure you have all
the proper parts prior to going to the job site.
The following items are shipped with each TG-7E or TG-7FE:
•
Telguard Cellular Communicator
•
Cellular Antenna
•
Antenna Cable and Mounting Bracket
•
AC Power Adapter
•
Battery Connection Cable
•
Pluggable screw terminal blocks (2-, 2-, 3-, & 6- position)
•
Enclosure Key
•
Quick Install Guide
•
Frequency Warning Label (TG-7FE only, to be applied for fire installations in Canada)
•
Tamper Switch Assembly (TG-7E only)
PRINTED CIRCUIT BOARD (PCB)
INSIDE METAL ENCLOSURE
TERMINAL
BLOCKS
LTE
ANTENNA
MOUNTING
BRACKET
ENCLOSURE
KEY
AC ADAPTER
12FT ANTENNA
CABLE
BATTERY
CONNECTOR
