TELFORD CORNER DESK ASSEMBLY INSTRUCTIONS
For this step:
Tools
recommended
STEP 9
Version 1 -
201026
Page
11
of
12
L
Screw for Fitting
Anti-tilt Bracket
4x12mm
Anti-tilt Bracket
M
2
2
WE RECOMMEND FIXING THIS DESK TO THE WALL
CONSTRUCTION OF WALLS CAN BE VERY DIFFERENT SO FITTINGS ARE NOT SUPPLIED.
PLEASE CHOOSE SUITABLE FIXINGS TO SUIT THE YOUR HOME.
IF IN DOUBT CONSULT AN EXPERT
Loosen screw (L) a little. Holding desk firmly against the wall, push
bracket (M) so the long leg touches the face of the wall.
Use your screw/fixing to fix bracket to wall.
Make sure bracket is touching wall evenly, then tighten screw (L).
Warning: Always ensure the area to
be drilled is free from hidden electrical wires, water and gas pipes.
In the final position the desk is to be fixed, first place it
against the wall.
Carefully mark the wall with a sharp pencil, dead-centre
of the hole in the long leg of the metal anti-tilt bracket (M).
Carefully mark the
hole position.
Drill the
hole in the wall.
Choose a suitable
wall fixing.
M
L
M
L
