Telex NEXUS-IP-G1-US-IOT, Installation Manual

Page: 10 / 18

10 en | NEXUS-IP-G1-US-IOT PC recovery and backup options NEXUS-IP-G1-US-IOT PC
2020-07 | 03 | F.01U.380.986 Installation manual Bosch Security Systems, LLC
5 NEXUS-IP-G1-US-IOT PC recovery and backup options
The Telex NEXUX-IP-G1-US-IOT PC is delivered with the Seneca Backup and Recovery
software. This allows you to create external (USB Flash drive) restore media when replacing
the SSD hard drive or to create a backup recovery point. This is stored on the internal D drive.
The Seneca software supports many options for backup and recovery.
System Backup File and System Recovery Steps
– Create a USB Recovery Media : Use the USB Recovery Media when the image on the local
drive is corrupt, when getting a replacement hard drive, and as a potential storage
location for your system backups.
– Create a System Backup : After making changes to your system and after rebooting (with
no Windows Updates in progress), you can create a system backup. A system backup is
comparable to a snap shot of the system; to which the system can be restored, if needed.
The system keeps only the two most current system backups, along with the Factory
Image.
– Recreate a New “Factory Image”: Use this feature to create a new Factory Image due to
critical changes needed and to update all the affected systems.
– Update the Factory Image: After Recreating the Factory Image, you will need to use this
feature to update the Recovery Media as well as the Systems so that it will be the new
baseline.
– Reboot into the Recovery Environment : Use this feature to reboot the system to recover
to the Factory Image or a System Backup.