HB-3+ Headset Adapter Connected to the IP-223 Operating as a Positional Intercom
4
AN-DISPATCH-036
2.0 HB-3plus Setup
To
configure the jumper for console mode,
do the following:
> Move
J8
to the B position.
3.0 IP-223 Setup
The IP-223 is configured for Local mode.
3.1
Multicast Setup Window
Both Unicast and Multicast Addressing are supported for this feature. A unique set of RX
and TX ports are required and should match a line configured in the console.
To
configure the IP-223’s operation mode
, do the following:
> In the Multicast Address Setup window, select
Local Mode
from the Line Type drop
down menu for the line you are configuring.
FIGURE 1. Intercom Design Layout