Telex Audiocom US-2000, Operating Instructions Manual, Page: 7 / 22

dio on that channel. Tap the Mic Kill key to exit the feature
setup.
Headset Audible Call Alert Feature:
This feature will cause an audible beep in the headset whenever
there is an incoming call from any channel. Press and hold the
key to access this feature. The key will glow green and the cur-
rent Headset Audible Call Alert status will be displayed (when
both
Call
keys are lit, Headset Audible Call Alert is enabled).
Press either Call key to enable or disable Headset Audible Call
Alert on both US-2000 channels. Tap the
Mic Kill
key to exit the
feature setup.
10.
Talk keys
There is a Talk key for each channel. With either the Headset or
Panel Mic selected, the Talk keys operate in two ways:
Latched Mode:
Tap the key once to talk. The key will glow green. Tap the key
again when finished with a conversation.
Momentary Mode:
Press and hold the key to talk momentarily. Release the key
when finished talking.
11. Call keys
The Call function allows the user to signal other devices on the inter-
com system. There is a
Call key for each channel. The Call keys
operate in two ways:
Call receive:
When there is an incoming call signal, the key blinks red. (If
Headset Audible Call Alert is enabled, incoming calls will cause a
beep in the headset.) To respond to an incoming call, turn on
the
Talk key for that channel and begin talking.
Call send:
To send a call signal to a station on a channel, press and hold
the
Call key until a verbal response is received. The Listen key
6