5
CHAPTER 1
Operation
Headset Operation
1.
Connect the
headset
as shown in Figure 1.
2.
Rotate the
entire boom
to wear the microphone on either the right or left
side of the head.
3.
With the Airman ANR™ 500 headband resting securely on the top of the
head, check the earcups are centered over the ears. Proper performance
depends on proper fit of the headset.
4.
For best noise canceling, position the microphone as close to the mouth as
possible with the hole in the microphone housing pointing directly at the
mouth and speak in a normal voice. (See Figure 2)
5.
Select stereo operation if the headset is plugged into an aircraft intercom
system that is wired for stereo, otherwise select mono operation.
