TeleWell TW-EA210, User Manual

Page: 72 / 131

7
Chapter 3
Configuration
The Router can be configured with your Web browser. The web browser is included as a standard
application in following operation systems, UNIX, Linux, Mac OS, Windows 95/98/NT/2000/Me/XP, etc.
The product provides a very easy and user-friendly interface for configuration.
3.1 Before Configuration
This section describes the configuration required by LAN-attached PCs that communicate with the Router,
either to configure the device, or for network access. These PCs must have an Ethernet interface
installed properly, be connected to the Router either directly or through a hub, and have TCP/IP installed
and configured to obtain an IP address through a DHCP server or a fixed IP address which must be in
the same subnet of the Router. The default IP address of router is 192.168.0.254 and subnet mask is
255.255.255.0. The best and easy way is to configure the PC to get an IP address from the Router.
Please follow the steps below for PC’s network environment installation. Before taking the first step,
please check your PC’s network components. If your PC connects to the ADSL Modem/Router through
USB port, the TCP/IP protocol stack must be installed. If your PC connects the ADSL Modem/Router
through Ethernet port, the TCP/IP protocol stack and Ethernet network adapter must be installed. If not,
please refer to MS Windows relative manuals.
Any TCP/IP capable workstation can be used to communicate with or through
the Router. To configure other types of workstations, please consult the
manufacturer’s documentation.
Installing the USB Driver on a PC
Please follow the steps below to install the USB driver.