V1.1
11
9502. You can program the LCR function so whenever you dial a number beginning with
00, the phone will automatically change this to 950200.
For example: 0046 46 2805000 would automatically be dialed 950200 46 462805000.
Please note!
In order to place your call with a certain operator you must be a registered subscriber.
Only one LCR (Least Cost Routing) setting can be active at a time.
Setting LCR
1.
Press
MANUAL
.
2.
Scroll until “SETTINGS” is displayed using
/
△ △
. Press
OK
.
3.
Scroll until “LCR” is displayed using
/
△ △
. Press
OK
.
4.
Select either ON or OFF using
/
△ △
. Press
OK
.
5.
Enter the dialing sequence to be replaced (up to four digits, e. g. 00).
If there is already a number entered here, erase it using c and press
OK
.
6.
If you have entered less than four digits, press
OK
to move on.
7.
Enter the new dialing sequence (up to eight digits, e. g. 950200). If there’s already a
number entered here, it can be erased using
C
.
8.
Confirm the programmed settings by pressing
OK
.
Automatic Network Prefix using LCR
The LCR function can be used to insert a number/s in front of all telephone numbers.
1.
Press
MANUAL
.
2.
Scroll until “SETTINGS” is displayed using
/
△ △
. Press
OK
.
3.
Scroll until “LCR” is displayed using
/
△ △
. Press
OK
.
4.
Select either “ON” or “OFF” using
/
△ △
. Press
OK
.
5.
The left side of the display must be empty. If there’s already a number entered here,
erase it using
C
. Press
OK
.
6.
If you have entered less than four digits, press
OK
to move on.
7.
Enter the new dialing sequence (up to eight digits, e. g. 9 or 09). If there’s already a
number entered here, it can be erased using
C
.
8.
Confirm the programmed settings by pressing
OK
.
Area Code Setting (OPTION)
Receiver call phone numbers will automatic delete the area code in callback the phone
number.
1.
Press
MANUAL.
2.
Scroll until “SETTINGS” is displayed using
/
△ △
. Press
OK
.
3
. Scroll until “AREA CODE” is displayed using
/
△ △
. Press
OK
.
