ATTACH UNICOS T/MM10 TO A FIXED
SURFACE
You can attach the uniCOS T/MM10 to a
fixed surface
, so it is no longer possible to move the unit around.
The tabletop unit has three small openings on the bottom of the unit, which you can use to attach it to a
table.
First drill
three holes
in the table you want to fix the unit to, then you also need to foresee a large opening
to guide the cables of the unit through.
Figure 1-45
uniCOS T/MM10 table cutout
In the next step, insert the cables into the designated opening, and then insert and tighten the screws as
depicted in the image below.
ATTACH UNICO S T/MM1 0 TO A F IX ED SUR F ACE
8 4