Televic LINGUA IR, User'S Installation Manual

Page: 58 / 96

Make sure your computer does not have a fixed IP address . A Dante-enabled device
connected to a network will automatically setup its own network configuration, including its IP
address.
If the network has a DHCP server, which may be the case for installed networks, it will receive its
IP configuration using the standard DHCP protocol.
On a network without a DHCP server, which may be the case for temporary or smaller networks,
the Dante-enabled device will automatically assign itself an address using link local protocols, in
the same way PCs and printers often do.
Configure Dante™ Routing
Once the Dante™ devices are connected, you need to route the Dante™ channels from your input system
to the Dante™ channels of the transmitter.
Figure 1-29 How to route the output from the conference system to the input of the Lingua IR transmitter
The Routing tab of the controller shows all Dante™ devices with their inputs and outputs. The top part
shows the outputs. Here you can find the output from your conference system (1) . The bottom part on
the left hold all inputs together with the Dante channels of the transmitter (40 channels) (2).
SET UP DANTE™ 5 8