CONNECTING WIRELESS UNITS TO
THE WAP
By default, the WAP automatically allows all units to make a connection. This is indicated with a blinking
green LED. Just start the unit by pressing on the microphone button and it automatically connects to the
WAP.
If you do not want other units to connect to the WAP, push on the button on top of the WAP. This will
only allow the known connected units to connect. This is indicated with a fixed green LED.
Adding a new unit requires you to push on the button again, which will allow for all new units to connect
to the WAP. This is indicated with a blinking green LED.
When pressing the button on top of the WAP for more than three seconds, the list of units is erased and
the system will allow all units to connect.
LED Indications
LED on WAP
LED meaning
Green fixed
Only Confidea G4 units that were connected before are allowed to
make a connection with the WAP.
Green blinking
All Confidea G4 units are allowed to make a connection
CONNECTING WIRELESS UNITS TO THE WAP
44
