Aladdin Digital Infrared Language Distribution
Installation and User Manual
Televic Conference Systems
2011-09-01
30
2.5.2.
Carrier
“Carrier” includes 4 submenus:
→ “Set up status”
→ “Channel number”
→ “Frequency point”
→ “audio setting”
1) Enable/Disable Current Carrier
Use “
/
” button to enable or disable
current carrier
Use “MENU” button to save;
“Master” mode menu
“Slave” mode menu
If “Enabled”:
Press “MENU” button to setup current carrier
The frequency of the current carrier will be
displayed. (figure 1.5 shows the band
allocation).
If “Disabled”:
press “Menu” to return to high level menu
“Master” mode menu
“Slave” mode menu
2) Channel Number Configuration
Press “MENU” button at this interface to go to
channel number configuration, as shown in
figure below.
Use
“
/
”
button to increase or decrease
channel number. The exact channel number
depends on the audio quality (see 1.2.5).
Use “MENU” button to save channel number
setting
“Master” mode menu
“Slave” mode menu
3) Audio Quality Setting
Go to audio quality setting interface.
Press “MENU” button to switch channel
number (in the case of more than one channel).
“Audio input:” indicates current channel
corresponding Aladdin T8 transmitter audio
input channel.
After having selected channel number(s), use
“
/
” to adjust audio quality.
Audio mode includes
: → “Standard MONO”
→ “Perfect MONO”
→ “Standard STEREO”
→ “Perfect STEREO”
Selectable audio quality depends on channel
number (refer to section 1.2.5).
“Master” mode menu “Slave” mode menu
