User Manual
“RSD - 7296”
67
ENGLISH
User Manual
“RSD - 7296”
To carry out an automatic scan for the channels offered by the satellites in
your installation, press OK over the -
Automatic scan
- option in the main
Menú.
You can carry out the channel scan in a satellite if the satellite that has been
selected in the -
Dish Setup
- Menú has been correctly assigned to an anten-
na.
The options are:
-
Add channels:
To select one of the satellites use the
/
buttons or
press
OK
to activate the pop-up Menú.
-
Polarisation
: Using the
or
buttons, select the type of polarity
that you wish to use to carry out the scan. The options are Horizontal
(H) , Vertical (V) and Hori Vertical (H+V).
-
Starting frequency
: Using the numeric buttons, indicate the frequency
at which you want the scan to start.
-
Ending frequency
: Using the numeric buttons, indicate the frequency
at which you want to the scan to stop.
-
1/2/3 symbol rate
: Using the numeric buttons, indicate the symbol
frequency that you are going to use for the scan. If you only want to
use one, you must enter a “0” in the rest.
-
FTA / All
: Indicate if you want to search for all of the satellite channels
(ALL) or only for those that are free-to-air (FTA).
If you want to stop the scanning process before it has finished, you must
press the
EXIT
button on the remote control.
10.- Automatic scan
103332_08.qxd 06/03/2006 11:47 PÆgina 67
