Televes DIGINOVA 1441, Manual

Page: 19 / 32

19
ENGLISH
This antenna is specially designed for the reception of the DTT .
It is protected by an ABS plastic radome that is UV resistent ; it is ideal to work within bad climatic conditions. Besides, it shows a low visual
impact, what is very recommendable for the installation in fronts, balconys and single-family homes in general.
Ideal as an antenna for occasional use (holidays, trips, etc.).
Characterised by its easy installation , robustness and high electrical performance.
Manufactured using materials with high resistance to water, wind, etc.
Accessories included: (figs. 1a & 1b depending on the reference)
- 1 Indoor domestic amplifier
- 1 "Power injector" for battery connection.
- 1 Roll of T-100 cable (14 metres).
- 1 M/F extension cable 1.3 m.
- 1 Shielded IEC-type connector.
- 3 F type connectors.
- 1 F watertight cover.
General features
• 10 element Yagui-type antenna (directional), using Microstrip* technology in UHF, and printed FM-BIII dipole.
Its shielded amplifier amplifies or permits UHF crossover (depending on the input voltage), allowing FM-BIII crossover without amplification in
both case.
• System comprising an FM-BIII-UHF antenna, power injector for voltages between 12-24V (use with accumulators), and a 230V~ ±10%
indoor domestic amplifier (connection to power supply).
• The Indoor domestic amplifier:
- Provides the necessary voltage for the antenna and additional amplification in FM-BIII and UHF.
- Allows the user to control the operating mode of the antenna, activating or de-activating its amplifier.
- Includes a cable for connection to the power supply.
* European patent
User manual