Televes DIGIDOM 7167, User Manual, Page: 33 / 64

33
EN
1.- Turn ON the Transmitter (TX) and Receiver (RX) power
2.- Power ON the A/V sources and A/V display.
3.- Adjust the A/V Channel by combining the back switches.
Switch the Channel selector of Transmitter (TX) and Receiver (RX)
to the same channel.
4.- IR Extender.
Make sure the IR Extender mouse put in front of the A/V source's IR Sensor.
5.- A/V Loop Through Connection.
If you want to watch the program from the A/V source at the room of Transmitter (TX) loca-
ted, you just need to connect the Transmitter (TX) to TV display by the SCART cable (FEMA-
LE side)
The product designed in loop through connection enables an audio video to be looped
through various devices without using external splitters. As diagram shown below, A/V sour-
ces 1 can transmit audio video signals to both Transmitter (TX) and A/V Display at the same
time, you and your family will concurrently enjoy the program either in living room or in dining
room.
Transmitter
Transmitter
DC 9V
OFF/ON
POWER
ON
1 2 3
ID/CH SET
N
R
ON
1 2 3
ID/CH SET
DC 9V
OFF/ON
POWER ON
1 2 3
ID/CH SET
Loop through
A/V channel
A/V Display
A/V Sources
FEMALE side
for A/V display
MALE side for
A/V source
1 2 3
CH1 On On On
CH2 On On Off
CH3 On Off On
CH4 On Off Off
CH5 Off On On
CH6 Off On Off
CH7 Off Off On
CH8 Off Off Off
Operations