Televes avant 3, User Manual

Page: 24 / 28

Launch Amplifier Launch Amplifier Avant3
The LEDs on the unit are lit depending on the filter
that we are programmed.
Extended menu
To access the this menu keep pressed the key,
for more tan 3 sec.
The extended menu can only be accessed from
the first main menu (Configuration of inputs).
The modification of the value selected in each
menu, and the recording of changes, is performed
in the same manner as in the main menu.
Language selection
The extended menu allows to select the language
on the display.
The mapping of the keys in this menu are as
follows:
& To select the language
(Short press) - Positioning of the cursor.
(Long press) - Return to main menu.
(Short press) - Not applicable.
(Long press) - Recording of parameters.
Saving parametres
After choosing the desired value in any of the
menus (main or extended), for recording data,
press the key for approximately 3 seconds. The
display shows the indication:
Guardando
config...
Error en
filtros!
Memo. della
config...
Errore nei
filtri!
Enreg.des
parametres
...
Erreur dans
les filtres!
Saving
config...
Filter
error!
Tallennetaan
asetuksia...
Suodin
virhe!
Parameter
werden
Filter
error!
gespeichert
...
If you try to record data but you are committing an
error in the filter settings (channel overlapping),
the unit does not allow this operation and displays
the following message:
Guardando
config...
Error en
filtros!
Memo. della
config...
Errore nei
filtri!
Enreg.des
parametres
...
Erreur dans
les filtres!
Saving
config...
Filter
error!
Tallennetaan
asetuksia...
Suodin
virhe!
Parameter
werden
Filter
error!
gespeichert
...
24