24
User manual
Avant 3
4.1.- MAIN MENU
From now on, by pressing quickly on
you
can go through the main menus, in this
order: Inputs, Filter 1, ..., Filter 5 and VHF
Filter.
Functions related to program the VHF
filter are not applicable to this reference.
Note:
If you want to modify the menu language
before beginning the configuration of the
device, you must go to the “language”
menu. To do so, press
(long press)
from the
Input menu
to access the
Extended menu
and then use
or
to
select the language. Finally press
(long
press) to save the changes.
For further information, see “
Extended
menu => Language selection
”.
1.- Configuration of inputs
The first menu is the “
Inputs
” menu. The
buttons for this menu are as follows:
- These go through the menu options:
5-0, 2-3.
- (short press) - This positions the cursor
over each of the parameters that can be
modified
- (long press) - This accesses the exten-
ded menu (language).
- (short press) - This accesses the next
main menu.
- (long press) - This saves the parame-
ters.
To modify a value, press
, and the value
will begin flashing. You can change the
value using
or
.
I
NPUT
S
U1 | U2
|
[2] |[3]
I
NPUT
S
U1 | U2
|
[5] |[0]
2.- Filter programming
By pressing
you can access the second
menu,
Filter programming
. The buttons for
this menu are as follows:
- This selects the lower and upper
channels of the filter.
- (short press) - Cursor position.
- (long press) - Nothing.
- (short press) - This goes onto the next
menu.
- (long press) - This saves the parame-
ters.
Press
(short press) to enable the first
channel of Filter 1. Use
and
to select
the lower channel of the filter. Press
(short press) to enable the upper channel of
the filter. Use
and
to select the upper
channel of the filter.
FILTER 1
__
