Televes 769503, User Manual

Page: 30 / 40

30
GPON ONT STANDAR
LED Identification LED Status Description
A1 READY
ON Registration in progress
OFF Successfully registered by the OLT
A2 POWER/PROC
ON Power supply ON
OFF Power supply OFF
A3 GPON LINK
Refer to the next table
A4 AUTH (I)
A5 CATV (II)
ON Port administratively connected
Flashing
Port administratively connected with
CAT V
OFF Port administratively disconnected
A6 ETHERNET (Left)
ON With Ethernet connection
OFF No Ethernet connection
A7 ETHERNET (Right) Flashing Ethernet IN/OUT activity
Table 6-1: ONT 769503-SFU LED status
The following combination of GPON LINK (A3) and AUTH (A4) LEDS reflects the various states that the ONT is in during the process of configuration
and communication with the OLT (Optical Line Terminal).
ONT Status
LED Status
Description
A3 GPON Link A4 Auth
1 - Initial OFF OFF Initial State
2 - Standby Flashing OFF
ONT 769503-SFU is waiting for initial configu-
ration by the OLT
3 - Serial-Number Flashing Flashing The OLT is configuring the ONT 769503-SFU
4 - Ranging Flashing ON ONT 769503-SFU and OLT synchronisation
5 - Operation ON ON ONT 769503-SFU’s normal operational status
6 - POPUP Flashing OFF Loss of optical signal detected
7 - Emergency-Stop ON OFF Anomalous event
Table 6-2: ONT 769503-SFU states
6.1.2 Final checks
Check, using the following table, if the ONT 769503-SFU has been successfully registered on the network
LED LED Status Device
A1 ON > OFF
ONT 769503-SFU A2, A3, A4 and A6 ON
A5 Flashing*
‘Power’,
‘Broadband’
and ‘Internet’
ON Home-Gateway
Note:
* When the RF video server is active.
Table 6-3: ONT 769503-SFU LED final checks