EN
11
Bridged interface
: Interface is a bridge where physical interfaces are
member. LAN is an example of bridge interface and creates a bridge,
named BR-LAN, bind to two Wi-Fi radios (for 2.4GHz and 5GHz) and local
eth1 LAN physical interface.
Interface: Select protocol
On
Edit Interface > General Setup
select interface protocol between: Static IP
Address, DHCP client, PPPoE or L2TP. Every protocol has its own configuration
page according to required parameters.
Static Address
IPv4 Address
: Fixed IP Address for interface.
IPv4 netmask
: Netmask of interface network.
IPv4 gateway
: Gateway for interface network.
IPv4 broadcast
: broadcast address for interface network.
DNS Servers
: DNS servers for interface network. Multiple options are
available.
DHCP Client
Hostname
: Use this field to set a custom hostname, other than default on
system, when send DHCP requests.
PPPoE Client
Create a new PPPoE connection with a PPPoE server.
PPPoE (Point-to-Point Protocol over Ethernet) is a network protocol for PPP
encapsulation over an Ethernet layer. It is a point-to-point Internet access
protocol that allows WaveData to establish a connection with a server offering
authentication, encryption, maintenance and compression. Check with your
provider to see if they offer this service.
Please, use following PPP parameters to configuration tunnel:
PAP/CHAP username
: Username of PPP account.
PAP/CHAP password
: Password of PPP account.
Access Concentrator
: Specifies the Access Concentrator to connect to. If
unset, pppd uses the first discovered one.
Service Name
: Must be the same than PPP Server configuration. If unset,
pppd uses the first discovered one.
