5
EN
1. Información General
Main Features
Supports wireless transmission of HDMI up to 1080p.
Supports wireless transmission of 3D HDTV.
Transmitter side includes HDMI pass-through output for
simultaneous local viewing.
Less than 500ms low latency.
Room to room HD wireless transmission
Up to 30m Line of Sight long distance transmission.
Low power consumption.
30 ~ 60KHz IR
Package Contents
Transmitter (TX) x1
Receiver (RX) x1
IR emitter probe x1
IR receiver probe x1
DC 5V/1A power adaptor (Micro USB type) x2
Quick guide x1
Wall Brackets x2
Screws x4
Screw Anchor x4
2. Connections and Indicators
Caution Statements
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifi ers) that produce heat.
8. Only use attachments/accessories specifi ed by the manufacturer.
9. Unplug the power supply unit during lightning storms or when unused for long periods of
time.
10. Refer all servicing to qualifi ed service personnel. Servicing is required when the apparatus
has been damaged in any way, such as power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been dropped.
Warning
Reduce the risk of fi re or electric shock, do not expose this apparatus to rain or moisture.
Apparatus shall not be exposed to dripping or splashing and no objects fi lled with liquids,
such as vases, shall be placed on the apparatus.
Safe operation
Power requirements for the power supply unit are 100-240V~ 50/60Hz.
To disconnect the equipment from the mains pull the power supply unit never the cable.
It is strongly recommended not to connect the power supply unit to the mains until all
connections have been done.
The socket outlet shall be installed near the equipment and shall be easily accessible.
Safe installation
Ambient temperature should not be higher than 45°C.
Do not place the equipment near heat sources or in a highly humid environment.
Do not place the equipment in a place where it can suff er vibrations or shocks.
Please allow air circulation around the equipment.
Do not place naked fl ames, such as lighted candles on or near the product.
Symbology
Equipment designed for indoor use.
This symbol indicates that the power supply unit complies with the safety
requirements for class II equipment.
The present product can not be treated as normal household waste, it must
be delivered to the corresponding collection point for waste electrical and
electronic equipment (RAEE).
The equipment complies with the CE mark requirements.
The product is EAC certifi ed.
Safety recommendations
INDICATIONS LED
MODE
IR IN
IR
OUT
POWER
CONNECTOR
HDMI
IN
HDMI
OUT
HDMI
OUT
POWER
CONNECTOR
INDICATIONS LED
MODE
