Televes 554912 User Manual Download Page 6

DVB-T SD/HD  Encoder/Modulator

6

2.2 Installation/Application 

1.

  Screw the encoder modulator where you want to install it. Left 10 cm of free 

space around from each other once the devices have been installed.

2.

  Please connect the cable(s) from the source. The signal source can be from a 

blu-ray, DVD, SD/HD satellite receiver, CCTV, surveillance monitor, etc. 

3. 

Connect cable to RF output to TV.

4. 

Connect the power to the wall outlet with the power adapter.

3. Operation

3.1 Button introduction

554912 Encoder Modulator is controlled and managed through the key board 
and LCD display.

LCD Display

 – It presents the selected menu screen and the parameter settings. 

The backlight in the display is on when the power is applied.

LED

 – These lights indicate the working status

       

Power

: It lights on when the power supply is connected.

       

 Alarm

: It lights on when the there is error, such as the signal source loss.

       

 Lock

: It lights on when the signal source connected and goes off  when the 

signal lose.

Please check if is selected the correct interface.

 /   / 

 / 

 buttons – Use these buttons to turn the screen pages, shift the 

target items by moving the triangle, or change the parameter settings in the 
program mode.

ENTER

 – Use this button to enter a submenu or save a new setting after 

adjustment; press it to start adjusting the value of certain items when the 
corresponding underline fl ash with Up and Down buttons;

Press it to activate the hidden selections and change the setting with Up and 
Down (or Left and Right) buttons.

MENU

 – Press this button to step back.

LOCK

 – Locking the screen / cancelling the lock state, and entering the main 

menu after the initialization of the device. After pressing lock key, the system 
will question the users to save present setting or not. If not, the LCD will display 
the current confi guration state.
When the power is connected, the LCD will start to initialize the program. The 
LCD menu goes as below chart.

RF 

IN

RF 

OUT

YPbPr

S-Video

A/V

Power

YPbPr

S-Video

CAMARA SD/HD

CCTV

Blu-ray / DVD

SAT SD/HD

HDMI

A/V

HDMI

TS

 FILES

Summary of Contents for 554912

















Reviews: