Instruction Manual
MX2A Active Thermocouple Gauge
1.4
Dimensions
Figure 1: MX2A Dimensional Drawing
1.5
Safety Information
START BY READING THESE IMPORTANT
SAFETY INSTRUCTIONS AND NOTES
In these instructions the word “product” refers to the MX2A and all of its approved parts and acces-
sories. NOTE: These instructions do not and cannot provide for every contingency that may arise in
connection with the installation, operation, or maintenance of this product. Should you require further
assistance, please contact Televac at the email address on the second page of this manual.
This product has been designed and tested to offer reasonably safe service provided it is installed,
operated, and serviced in strict accordance with these safety instructions.
These safety precautions must be observed during all phases of operation, installation, and service
of this product. Failure to comply with these precautions or with specific warnings elsewhere in this
manual violates safety standards of design, manufacture, and intended use of the instrument. Televac
disclaims all liability for the customer’s failure to comply with these requirements.
READ Instructions – Read all safety and operating instructions before operating the product.
RETAIN instructions – Retain the safety and operating instructions for future reference.
HEED warnings – Adhere to all warnings on the product and in the operating instructions.
FOLLOW instructions – Follow all operating and maintenance instructions.
email: [email protected]
tel: +1 215 947 2500
web: frederickscompany.com
mx2a_im rev F
4 of 17
