© 2017 The Fredericks Company | www.frederickscompany.com | [email protected]
| +1 215 947 2500
televac_an3018 rev -
Page
5
of
12
2.1.8
The computer and unit should now be on the same local network. Open a browser, and enter the IP
address of the unit (192.168.0.8) into the search bar. When prompted, enter the username and password
(default Admin:admin).
2.1.9
The web page hosted by the module should appear. Select the Configuration tab on the left.
2.1.10
Change the IP address and subnet mask to the desired configuration (see step 2.1.6 for the network
configuration). In this example, step 2.1.6 showed that the network needed is 149.174.211.X with a
subnet mask of 255.255.0.0. The unit in this example will be configured to an IP address of
149.174.211.99, which has been verified to not conflict with any other IP address on the network. Select
Save Settings to finish the configuration, and cycle the power to the unit for the changes to take effect.