Teletype WorldNav 5300, Hardware Manual, Page: 16 / 20

31
Main Menu
Language
Select language to set system language. Note that
the language choice here does not apply to the
navigation software.
System Information
In general you will not need to access this menu as it
relates strictly to the hardware, none of the
information relates to the navigation software.
Navi Path
It is recommended to leave the Auto run GPS setting
on the default position of OFF. If however you would
rather not have to press "Navigation" each time you
want to use the GPS you can move the slider bar to
the left. This means that each time you turn on the
GPS it will automatically go into Navigation mode.
Be careful, if you do this then it will be more difficult
to access the other menus of the GPS such as
Calibration, Backlight, FM, Bluetooth, etc.
Hardware User Guide
32
The bottom portion of this menu stores the location
of the WorldNav navigation software so that when
you push "Navigation" on your GPS it knows where
to find the software. Do not change this setting
unless specifically instructed by a TeleType support
technician. If you change this by mistake you will not
be able to use the navigation function.
It is best not to change anything in the Navigation Path Setting
3.7 AV-in
Attach a rearview camera using a 2.5mm cable.
(Camera and cables sold separately). Once you
attach the camera it will appear automatically on
the screen. Contact TeleType for assistance with
wiring.