Teletronics International WINC 2400C, Owner'S Manual

Page: 7 / 27

7
5. One (1) WINC 2400C Operation Manual..
6. One (1) warranty card
Each WINC 2400C is uniquely identified by a digital address code. The address enables two intended
modem units to establish a communications link. The seven (7) digit address can be found on the label
affixed to the left side of the unit and is defined by the right-most seven (7) digits of the serial number.
The device address can also be found by using the ATI0 command to be further discussed in Appendix A.
A DB-25 female connector is used for synchronous operation. (There is also a port, the DB-9 male
connector. It is used for configuring the unit prier to first operation by a PC notebook. Once it is
configured, the port is no longer needed for operation).
If anything is missing or damaged, please contact your supplier immediately.