manualshive.com logo in svg

Teletronics International TT 900, User Manual

Share
Download
Teletronics International TT 900 User Manual Download Page 25

 

25

Device Control 

 
This section has functions that will allow the TT900 to Reboot and Reset the system configuration to factory defaults. 

 

 
Firmware Upgrade

 

 
This section allows the TT900 firmware to be upgraded or changed directly from the web interface. Click on the 
Browse button to select a file from the host machine.  

 

Register 
 

 

 
The TT900 has implemented a hardware modification authorization process to prevent use by fraudulent hardware 
from other manufacturers. This will require any hardware change on the radio card used on the TT900 to input a serial 
code generated based on each unique MAC address. Please contact Teletronics Support to a pickup a valid serial 
number to deactivate the pre-registration protection after a radio card swap. If the unit is not registered some features 
such as SSID and Wireless Channel selection will be disabled. 
 

Summary of Contents for TT 900


























































Reviews:

No comments

Brands by name

Popular brands

Load more brands