Configuring Windows for IP Networking
To establish a communication between your PCs and the EzBridge 5800, you will need to set up a static IP address for
your computer first. This section helps you configure the network settings for your operating system. Please follow the
procedures below to complete the settings:
2.4 Windows
98/Me
1. Click
Start
on the taskbar and choose
Control Panel
from the submenu of
Settings
.
2. Select
Network
to open the
Network
dialog box, and then under the
Configuration
tab, select the
TCP/IP
protocol for your network card.
3. Click
Properties
to open the
TCP/IP Properties
dialog box.
4. Click
the
IP Address
tab and choose
Specify an IP address
. For example, type in
192.168.1.X
in the
IP
Address
(where X is any free IP number from 1-254, excluding 99)
area and 255.255.255.0 in the Subnet Mask
area. To ensure the system is now using the IP address you specify, restart the computer.
Summary of Contents for EzBridge 5800
Page 1: ...EzBridge 5800 User Manual 500mW ...
Page 18: ...Configuration ...
Page 22: ...Administration ...
