Voice Guide Keypad - LED63VG User Manual
Voice Guide Keypad - LED63VG User Manual
8
Operation
Arming
The system can be armed only if
the green
RDY1
LED is lit up.
Full
Full arming means all zones are
secured. Anyone coming into the
entrance zone is required to enter
a code. Otherwise the alarm is trig-
gered after entrance time is over.
Full arming sequence:
CODE
ARM
0
Quick full arming key se-
quence:
ARM
0
The
ARM1
LED lights up.
Stay
Stay arming means the user is al-
lowed to stay in (a) certain zone(s),
but the entrance zone is secured.
Anyone coming into the entrance
zone is required to enter a code.
Otherwise the alarm is set off af-
ter the entrance time is over.
Stay arming key sequence:
CODE
ARM
1
Quick stay arming key se-
quence:
ARM
1
The
BPS
LED lights up permanently
on the display and the LEDs, cor-
responding to the numbers of the
zones which are not armed, blink
slowly.
17
The new code has been accepted
and the system automatically en-
ters remote access permissions
mode.
The LEDs stand for the remote ac-
cess allowable operations. The lit
numbers indicate the permitted
programs.
Remote
disarm
Remote arm
Remote
bypass
Remote
programming
Remote
event memory
review
Remote code
access
Pressing a numeric key
alternatingly switches over the
state of the respective remote op-
eration from forbidden to permit-
ted.
Pressing the
ENT
key confirms
the selection.
Remote access permissions
key sequence:
ENT
3
3
3
Changing User Code and
Rights
To change the user code, the man-
ager is required to enter his per-
sonal code first before the user
code.
User code change key se-
quence:
CODE
PRG
USER
ID
(01-16)
(2 beeps)
