CA864 Installation manual
15
CA864 LCD keypad module
The keypad front panel with liquid crystal display (LCD) is given in Fig. 7.
The back LCD keypad panel is given in Fig. 8.
A chart of the main LCD keypad plate is given in Fig. 9.
!Any single LCD keypad can service all areas within the system!
LCD keypad module resources
The LCD keypad module has one input marked as ZONE IN. There are two inputs for the double zone
keypad.
The LCD keypad module has one output marked as OUT. This is a programmable output.
The LCD keypad module houses a self-protection key. This is a double action key and has been configured
by the producer.
The BLACK, GREEN, YELLOW and RED terminals are used to connect the module to the system bus.
Power supply from the +AUX and +PGM control panel is used to feed the auxiliary devices (sensors,
relays, etc.).
!The RED and BLACK terminals of the system bus CANNOT BE USED to supply auxiliary de-
vices (sensors, light indicators, relays, etc.). This supply can be controlled by the processing
block at the control panel and can be interrupted!
Fig. 7. Front panel of CA864 LCD keypad
TeleTek
LCD display
Indicators
Keys
Protective lid