74-0386-WC
www.telestream.net |
|
tel +1 530 470 1300
Specifications subject to change without notice. Copyright © 2022 Telestream, LLC.
Telestream, CaptionMaker, Episode, Flip4Mac, FlipFactory, Flip Player, Gameshow,
GraphicsFactory, Lightspeed, MetaFlip, Post Producer, ScreenFlow, Split-and-Stitch,
Switch, Tempo, TrafficManager, Vantage, VOD Producer and Wirecast, are registered
trademarks and Cricket, e-Captioning, iQ, iVMS, iVMS ASM, Inspector, MacCaption,
Pipeline, Vidchecker, and Surveyor are trademarks of Telestream, LLC. All other
trademarks are the property of their respective owners.
June 2022
3.
Connect displays:
connect one or more displays via
DisplayPort. This is accomplished either directly via
Mini DisplayPort connectors, or via DisplayPort
using the included Mini DisplayPort to DisplayPort
adapters.
Note:
All display cables must use VESA DisplayPort
certified cables to ensure correct operation and
prevent damage to the Gear unit or the attached
display.
4.
Connect audio:
connect stereo audio inputs or
outputs via 1/8” TRS cables on the front (for
headsets) or rear (for all other audio) of the unit and/
or via USB.
5.
Connect keyboard:
Prepare the wireless keyboard
and mouse by inserting the dongle from the
keyboard/mouse box into a USB port. Turn the
keyboard and mouse on using the power switch on
each.
6.
After all connections have been made
, plug in the
supplied AC power cord to provide power to the
unit.
Turn on Wirecast Gear and Begin Streaming
To get started using Wirecast Gear, follow these steps:
1. Read the complete Wirecast Gear User’s Guide
supplied on the Wirecast Gear system hard drive. A
shortcut to documentation can be found on the
Windows desktop.
2. Turn on the Wirecast Gear unit by pushing the
power button on the front panel. The button will light
up, and the unit will begin to boot up.
3. Personalize Windows as explained in the First Time
Boot topic in the Wirecast User’s Guide.
4. Create individual Windows user accounts on the
Wirecast Gear machine, if desired.
5. Ensure the unit is registered and license keys
applied to Wirecast and Switch Player software by
obtaining them as outlined on the previous page.
Wirecast Gear should now be ready to stream live
presentations.
First Time Boot
Every Wirecast Gear unit includes a pre-activated copy of
Windows 10 Enterprise IoT LTSC 64-bit. There is no need
to enter a serial number or product key as Windows
automatically recognizes the unique Gear hardware.
When Gear is first powered up, a series of prompts will
be presented to configure Windows 10 for locale and
personal preferences. Details of this sequence are
available in the Wirecast Gear User’s Guide.
Having Troubles?
If your Wirecast Gear computer does not operate as
expected, the following tips may provide assistance:
•
Close all applications other than Wirecast.
•
Close and reopen Wirecast. Be sure to save all
•
work first.
•
Restart Windows. Be sure to save all work before
restart.
If issues persist, please refer to the detailed help
information in the Wirecast Gear User’s Guide under
the topic “Obtaining Support | Information | Assistance”.
Links to contacting support are also available in this
section.
Note:
Please do not open the Gear unit while attempt-
ing to diagnose any issues or failures unless directed
specifically by Telestream, Inc. support staff. Any
damage caused by opening the chassis may void the
remaining Telestream warranty and may further result in
injury to individuals and/or property.
Refer to the user manual for compliance and regulatory
information, found here:
https://www.telestream.net/
pdfs/user-guides/Wirecast-Gear-3-User-Guide.pdf
Wirecast Gear
Read this First Sheet
