Ver. 0 12
5. Operation and Maintenance
5.1. WEB Interface
5.1.1. Introduction
Longent repeaters allow you to read and modify the current status via local WEB as well as
remote SNMP.
The main program features:
Supporting local WEB interface to show and modify the status value
Supporting Http 1.0
Supporting remote SNMP to show and modify the status value
Supporting SNMP versions 1, 2.
5.1.2. Hardware and Software Requirements
Your computer must meet the following requirements to be able to connect the repeaters via local
WEB interface:
Pentium III processor 600MHz or higher
RAM 64 MB minimum, 256 MB recommended
SVGA-compatible video card supporting the resolution of 800*600 or higher
Network adaptor
A cross cable to connect your computer and the repeater
A WEB browser like IE 5.0 or higher
Installed and configured TCP/IP protocol stack
Your computer must meet the following requirements to be able to connect the repeaters via
remote SNMP:
Pentium III processor 600MHz or higher
RAM 64 MB minimum, 256 MB recommended
SVGA-compatible video card supporting the resolution of 800*600 or higher
A wireless CDMA Modem to connect through the Asynchronous and Fax Service
A SNMP Manager to append MIB file and read repeater
