General
Commander’s
Confi guration Display
window consists of
several pages. Only one page is completely visible at one time.
You can activate a page simply by clicking the page’s heading
(see pictures 8 and 9).
INE1x1 MPEG-2 ENCODER CONFIGURATION
DISPLAY V1.0
Picture 9
.
Commander’s Confi guration Display page’s headings.
EASI
TM
MPEG-2 Encoder (INE) has the following confi guration
display pages that are introduced in this document:
-
Status
-
Properties
-
Module
-
Video
-
MPEG
-
Data
-
ATM
-
In-Band Management
-
SNMP
The information on confi guration sheets is shown in data fi elds
or boxes. You can change settings in data fi elds or boxes
whose background is white. Place your cursor in the desired
data fi eld or box and enter the new setting. Some settings are
entered by ticking a checkbox or clicking on a radio button, by
selecting from a pull-down list or by scrolling digits with the
help of spin buttons.
When you have entered a new setting, the Apply button is
activated --> “ “. By clicking Apply you verify the
new settings and they will be sent to the unit. If these settings
are legal, they become valid immediately and the Apply button
turns inactive --> “ “. By clicking Cancel you can
restore the original settings. Note that you can change several
settings before clicking Apply . If you entered settings with
the help of spin buttons, the Apply command is not needed.
10 INE1x1 Series User Manual rev001
