Teleste AC1500, User Manual, Page: 3 / 16

User manual AC1500
59300547 Rev.001
21.4.2016 3(16)
Installation
Housing
The AC1500 amplifier should be installed vertically so that the external cable
connectors and ventilation hole are pointing downward. Secure the housing with
the three mounting brackets. Figure 1 depicts for the positions of mounting
brackets as well as other installation dimensions.
The amplifier is equipped with an easy removable lid. The lid opens with the
hinges to the left. The open cover can be removed by first opening the lid into a
90 degrees angle and the lifting it off the hinges.
Before closing the lid is should be checked that:
• nothing is trapped between the lid and the case
• all case gaskets are in their correct positions
• lid seats evenly on the rubber gasket
Using 4 mm allen key, the lid retaining bolts are fasten in a diagonal sequence
with a tightening torque of 3 Nm. The class of enclosure is IP67 when correctly
installed and tightened.
Node housing should be grounded with at least 4 mm
2
grounding wire (Cu) from
a proper earth to the grounding point.
8616021
Figure 1. AC1500 housing dimensions – top and side view