Telesis TMP1700 User Manual Download Page 5

 
 

TMP1700/470 Marking System

 

 

 

 

 

28575G 

5 of 10 

TMC470 CONTROLLER 

The TMC470 controller may be installed as a table-top unit, a 
wall-mounted unit, a panel-mounted unit, or an enclosure-
mounted unit. All configurations provide features and connectivity 
for external communications. Differences occur only in the 
mounting configuration. 

TMC470 Specifications 

The TMC470 Controller specifications are subject to change 
without prior notice.

 

Compliance .............................. CE, RoHS 
Configurations .......................... Table-top, Wall-mounted, Panel-

mounted, or Enclosure-mounted 

Rating ....................................... NEMA 1  (I.P. 30)  table-top or wall-

mounted 

 

 NEMA 12  (I.P. 65)  panel-mounted 

using appropriate customer-supplied 
panel 

 

 NEMA 12  (I.P. 65)  enclosure-

mounted using Telesis-supplied 
TMC470N enclosure 

Dimensions ............................... 

refer to the appropriate TMC470 

Controller Dimensions 

drawing 

Weight  ...................................... 3.69 lb. (1.68 kg)  controller only 
 

 3.90 lb. (1.77 kg)   with wall-mount kit 

 

 5.52 lb. (2.51 kg)   with panel-mount kit 

 

 28.1 lb. (12.77 kg) with TMC470N 

enclosure 

 
 

TMC470 Specifications

  (continued)

 

Operating Temperature  .........  32° to 122° F (0° to 50°C) 

Operating Humidity .................  10% to 80% non-condensing 

Cooling .....................................  Internal, thermostatically-controlled fan 

Power Requirements ..............  95 to 250 VAC, 2 amps, 50-60 Hz, 

single phase 

Communications......................  TTL, Discrete I/O, RS232, RS485, 

TCP/IP, and USB (data backup & 
transfer) 

Input Signals ............................  Twelve (12) total, optically isolated 

8 dedicated, 1 programmable,  
3 available 

 

 10 VDC (minimum voltage) 

 

 30 VDC (maximum voltage) 

 

 12 to 24 VDC (nominal voltage) 

 

 2.3 mA @ 12VDC; 4.9 mA @ 24VDC 

(nominal current) 

Output Signals .........................  Six (6) total, optically isolated 

4 dedicated, 2 available 

 

 0.25 amps (maximum current) 

 

 0.50 ohms (maximum On resistance) 

 

 40 VDC (maximum line voltage) 

 

 12 to 24 VDC (nominal line voltage) 

 

TMC470 Controller Dimensions  –  Table-top and Wall-mounted Configurations 

Summary of Contents for TMP1700











Reviews: