TELES VoIP Box BRI Series, Reference Manual

Page: 142 / 226

7 System maintenance and soft-
ware update
VoIPBox DSL / VoIPBox BRI – version 21.0.009 Page 142
This chapter describes system messages that are saved in
the protocol file, as well as trace options.
7.1 Configuration errors
When typographical errors are made in the configuration
files, an entry appears in the
protocol.log
when the configu-
ration is activated. This entry includes the line number and its
contents.
7.2 Status and error messages
The
protocol.log
file – assigned as the file for logging the pro-
tocol in the configuration file (ActionLog= file ) – contains infor-
mation on all activities within the system. In the example
below, you can see that all activities are recorded beginning
with the date and time. If functions were activated by key
combinations from terminal devices you can identify these
along with the service ID.
Example 7.1
Protocol.log
file
06.05.14-16:37:26,[990]Start STATUS - TELES VoIPBox DSL 2 V20.0.2.0 (004e)
06.05.14-16:37:26,Remote Control from IP 172.20.27.141 (172.20.27.141)
06.05.14-16:37:26,Remote Control: OK
16.05.06-12:10:57,[01A]ERR: Layer1
16.05.06-12:10:58,[000]ERR: OK
16.05.06-12:10:58,[010]ERR: OK
16.05.06-12:12:06,Remote Control from IP 192.168.1.2
16.05.06-12:12:06,Remote Control: OK
16.05.06-12:12:16,Activate Configuration System
16.05.06-12:16:26,Remote Control Terminated
16.05.06-14:00:00,Activate Configuration Night2
16.05.06-14:00:00,Time Switch Operation
16.05.06-18:00:00,Activate Configuration Night3
16.05.06-18:00:00,Time Switch Operation