Specifications
Page
32
Receiver
dynamic range:
0 to –30 dBm or –10 to –43 dBm
Operating
temperature:
-40
°
C to +85
°
C
Power supply
:
Wide range switching power supply:
•
85 to 265Volts AC, 50/60 Hz, single phase
•
10 to 53 Volts DC
Surge
protection:
Leased line, up to 15KV
Carrier Control
:
Constant or switched, DIP switch selectable
Carrier loss
recovery
:
Train on Data
Throughput delay
:
Less than 10 milliseconds for fast polling.
Auto RTS:
Support DTE without hardware RTS
(high speed only)
Anti-Streaming:
27-second timer to prevent transmitter lock-up
network
Mechanical Specifications
Enclosure:
Aluminum with removable front and rear panels
Dimensions:
5.70” wide x 8.30” long x 1.50” high
Weight:
1.9 lbs.
Interface connectors
Leased line:
4-position screw terminal.
Data Terminal
Equipment:
DB-25 female connector
Summary of Contents for Flash Poll DSP 9612
