blue PiraT2 / 5E / 5E
User Guide
Datum: 21.09.2016
Seite 34 von 71
blue_PiraT2_UserManual_V2.4.1.doc
9.4 Memory space and level
About the ring buffer and other options, such as the protection of areas around markers, the
characteristics of the logger can be configured what to do, when the internal memory is full.
The following status messages can occur during operation of the data logger. It will also be dis-
played on the optional Remote Control (RC) / Remote Control Voice (RCV).
9.4.1 Status Logger: OK
Everything is OK
On the internal memory is enough free space to record all incoming data.
blue PiraT2
Memory-LED is off.
blue PiraT2 display
On the info page the display of blue PiraT2 shows
the storage level and the amount of protected data.
RCV
Table 9.3: Status Logger: OK
9.4.2 Status Logger: WARN
Warning, which does not affect the data recording
9.4.3 Status Logger: RING
Memory is full, buffer mode is active
The buffer is active and the storage filled more than 95 %. Older data will be deleted to save
space for newer data.
