Remote Control Touch
User Guide
Datum: 08.12.2015
Seite 19 von 61
RCTouch_UserGuide_V2.1.1.doc
8
Surface
This chapter describes the application setup and the layout of the individual views as well as the
displays contained.
The RCTouch software is very user-friendly thanks to its graphic surface and the clear outline.
Figure 8.1 shows the outline of the application in <Home> view and four applications. The appli-
cation views contain minimum one tab. For the applications Driver View and Settings, the num-
ber and naming of the tabs is set.
Figure 8.1: Application sitemap
Note:
“n” stands for any number of devices
When an application is launched for the first time after switching on, the uppermost tab is
shown. The next time you launch the application, the tab last opened is shown, except for the
application Busload.
8.1 Layout of the views
All views consist of a window and a dark blue frame.
Home
Status
Driver View
Busload
Settings
Overview
*Name RCTouch*
*Device name 1*
Functionkeys
Markerlist
Analog
Camera
CAN
CCP_XCP
GPS
*Device name 2*
*Device name n*
…
General
USB
Serial
MOST150
LIN
Ethernet
Digital
