background image

Speaker & Mute Key Connecting & Status Indicators - # 14 & 17

Speakerphones are equipped with LED indicators to show the current feature key status.
•  Press Speaker or Mute Feature Key to use that service - LED will light Green when
    that key is IN USE.

Indicators...

Wall Mounting (optional) 

The 3100 Series telephones was designed to 
conveniently wall mount.  
Please follow these easy steps:
1.   The handset retaining clip must be
      engaged to secure the handset when
      hanging it up.  To engage the clip, unsnap
      the clip, rotate the clip 180 degrees and
      then snap the clip into place. 

 # 3

2.   Plug one end of a short line cord into the
      line jack on the underside of the base unit.
      Plug the other end of the line cord into
      the wall jack.

 # 29

Wall Mounting...

5

10

3.  Attach the Wall Mount Bracket on to the
      back of the phone, placing mounting clips 
     into brackets slots - push in place until 
      you hear them snap into place. 

# 28

4.   Next, guide the phone with wall mount
      wedge onto the studs of the wall
      jack.  Press down rmly until you feel 
      it snap into place.  The unit is now wall
      mounted.  

      Please call PriorityCare to order Wall Mounting Wedge and Short Line Cord:
      TeleMatrix USA  +

1.719.638.8821

      

TeleMatrix Europe 

 +44 (0) 1908 682180

      

TeleMatrix Middle East 

 +971 4 2676550

# 28 

# 25

# 3

Features...

Using the Mute Feature on Speakerphones - # 17

A “Mute” key is provided to allow privacy during a background conversation.  When the 
“Mute” key is activated, the microphones in the handset and speakerphone are disabled.  
When the “Mute” feature is activated, the caller will not hear your voice.  The “Mute” key 
will light to show that the feature is activated.  To de-activate, press the “Mute” key again.  

(Does not apply to non-speakerphones)

Using the Conference Key on Speakerphones - # 12   

(only on 2-Line Models)

The “Conf.” key is used to establish a 3-way conversation. The conference feature is 
activated by a “soft” key that will automatically reset when hung up.
A 3-way “Conference” call can be established while using either the handset or speaker-
phone. To use the “Conf.” feature:
1.  Place the line that is currently in-use on Hold by pressing the “Hold” key. 
     The line status indicator will turn from Green to Red.
2.  The second call can be established by selecting the idle line key and dialing the call.
3.  When the second call is established, activate the 3-way conference call by pressing
     “Conf.” key. Line 1 and Line 2 will automatically “bridge” together and all three
      parties can now converse.
4.  To end the call, simply hang-up by placing the handset back in its cradle (on-hook)
     or by pressing the “Speaker” key.
5.  If you wish to continue speaking with one of the callers and wish to “drop” the other
     caller, simply press the line key of the caller you wish to continue speaking with. 
     The other caller will automatically drop-off.
    

 (Does not apply to non-speakerphones or single line telephones)

# 29 

Summary of Contents for MARQUIS 3100 Series









Reviews: