WALL MOUNTING
Wall Mounting Your 3000MW10
The 3000MW10 was designed to be conveniently wall mounted.
There is no additional hardware required. Follow these easy
steps:
1.
The handset retaining clip must be engaged to secure the
handset when hanging up. To engage the clip, unsnap the
clip, rotate the clip 180º and then snap the clip into place.
(figure 7)
2. Plug one end of a short line cord (not included) into the line
jack on the back of the Marquis base unit. Plug the remaining
end of the short line cord into the wall jack. Next, guide the
phone onto the studs of the wall jack. Pull down firmly until you
feel it snap into place. The unit is now wall mounted. (figure 8)
7
2 4 V 4 8V O FF
L1
L2
LAB EL-FCC
LAB EL-S /NO.
LABEL-IC
LAB EL-E TL
WEDGE
2.SNAP INTO PLACE.
TABS.
1.PRESS THE RELEASE
MOUNTING
1. UNSNAP
2. ROTATE 180 .
3. SNAP INTO PLACE.
Figure 8
Figure 7