OPERATION
LINE STATUS INDICATORS
The Marquis Telephone is equipped with LED
indicators to show the current status of the telephone lines. They
are:
•
Ringing Line—Ringing LED turns red on
incoming ringing signal.
•
Line IN USE—Line status LED lights green when line is IN
USE.
•
HOLD—Line status LED turns from green to red when placing
a call on hold.
PLACING A CALL USING THE HANDSET
•
Press the line 1 or line 2 key that does not show a line IN USE
indication.
•
Lift the handset.
•
Dial out by using the numeric dial pad or by pressing a speed
dial location.
RECEIVING A CALL USING THE HANDSET
•
When the phone rings, the ring indicator will light red to show
which line is ringing.
•
Select the line key for the line that is ringing and lift the hand-
set.
RECEIVING A CALL USING THE SPEAKERPHONE
•
When the phone rings, the ring indicator will light
red to show which line is ringing.
•
Select the line key for the line that is ringing. Press
the speaker key. The LED will light to show the
speakerphone is on.
•
To end a call, press the speaker key. The LED indi-
cator will go off and the line will hang up automati-
cally.
PLACING A CALL USING THE SPEAKERPHONE
•
Select line 1 or 2..
•
Press the speaker key. The LED will light to show
the speakerphone is on. The line status indicator will
light red to show the line is IN USE.
•
Listen for dial tone. Adjust the volume control if
necessary and dial the number using the dial pad or
a speed dial key.
•
To end a call, press the speaker key. The LED indi-
cator will go off and the line will hang up automati-
cally.
11
Summary of Contents for Marquis 2802MWD5
Page 5: ...CONTROLS 2 ...
