Telekonnectors TLK G400, Instruction Manual

Page: 7 / 17

- The LCD will show : OPTION MENU
 
- Using

(
Up) or

(
Down)
button go to “SET TIME/DATE”
- Press (Set/dial) to enter in to the manu
- The LCD will show : TIME/DATE
- Use

(
Up) or

(
Down) button to adjust the correct hour / Minute / Month / Year
- Then (Set/dial) button to confirm and set the time and date.
4. Setting flash time
- In the state of on hook or Off hook, press the
(Set/dial)
- The LCD will show : OPTION MENU
 
- Using

(
Up) or

(
Down)
button go to “SET FLASH TIME”
- Press (Set/dial) to enter in to the manu
- The LCD will show : FLASH 300MS,
- Use

(
Up) or

(
Down) button to select the required flash timing
- Then (Set/dial) button to confirm and set the flash time.
Note: Available Flash timings
– 100Ms, 300Ms, 600Ms, 1000Ms
5. Setting LCD contrast
- In the state of on hook or Off hook, press the
(Set/dial)
key.
- The LCD will show : OPTION MENU
 
- Using

(
Up) or

(
Down)
button go to “LCD CONTRAST”
- Press (Set/dial) to enter in to the manu
- The LCD will show : CONTRAST 3,
- Use

(
Up) or

(
Down) button to select the required LCD contrast level
- Then (Set/dial) button to confirm and set the LCD contrast level.
6. Setting pulse/tone dialing mode
- In the state of on hook or Off hook, press the
(Set/dial)
key.
- The LCD will show : OPTION MENU
 
- Using

(
Up) or

(
Down)
button go to “SET TONE/PULSE”
- Press (Set/dial) to enter in to the manu
- The LCD will show : TONE,
- Use

(
Up) or

(
Down) button to select the required dialing mode.
- Then (Set/dial) button to confirm and set the dialing mode.
7. Setting PABX code
- In the state of on hook or Off hook, press the
(Set/dial)
key .
- The LCD will show : OPTION MENU
 
- Using

(
Up) or

(
Down)
button go to “SET PABX CODE”
- Press (Set/dial) to enter in to the manu
- The LCD will show : PABX CODE - -,
- Use

(
Up) or

(
Down) button to set the PABX code.
- Then (Set/dial) button to confirm and set the dialing mode.