R305 AT Commands
©2011 Telegesis (UK) Ltd
- 92 -
AT Command Manual (Rev 3.05)
S4E
– End Device Poll Timeout
Description
Register defining the amount of time after
which an end device times out of its parent‟s
child table if it hasn‟t polled
Operations
R/W LOCAL
R/W REMOTE
Becomes effective
After Soft or Hard Reset
Storage
Non-Volatile
Parameters
XXYY
Where YY is the timeout in seconds left shifted by
XX (YY * 2^XX). The default number results in a
timeout of 5 Minutes, whereas the maximum
number results in a timeout of approximately 48
days.
Maximum
0EFF
Factory Default
0605
SW release
R303
S4F
– MAC Timeout
Description
Register defining the MAC timeout
Operations
R/W LOCAL
R/W REMOTE
Becomes effective
After Soft or Hard Reset
Storage
Non-Volatile
Parameters
XXXX
The Ember_Indirect_Transmission_Timeout is the
amount of time in milliseconds that the MAC will
hold a message for indirect transmission to a child.
In addition to this is also basis for the timeout after
which an acknowledged unicast is nacked in case
no ack is received.
Factory Default
0BB8
SW release
R302