5
Configuration
34 / 56
DoorLine Slim DECT
1.
Enter the configuration mode (see chapter Entry to con-
figuration mode [
25])
2.
Actuate the hashtag button and star button on the tele-
phone
3.
Enter configuration command "70" at the telephone
You will hear the positive acknowledgement tone
5.13.2 Connection setup with tone output
The loudspeaker is activated immediately, i.e. the call setup is completely aud-
ible at the DoorLine. The visitor can therefore also recognise whether the call
setup is still ongoing or whether the call/conversation duration has already
elapsed.
1.
Enter the configuration mode (see chapter Entry to con-
figuration mode [
25])
2.
Actuate the hashtag button and star button on the tele-
phone
3.
Enter configuration command "71" at the telephone
You will hear the positive acknowledgement tone
5.13.3 Mute connection setup
When the bell pushbutton has been pressed, only a short acoustic feedback
signal is issued at the door voice station; no further tone is issued at the loud-
speaker until the call reception is detected (factory setting). The switch-over to
voice mode takes place automatically.
1.
Enter the configuration mode (see chapter Entry to con-
figuration mode [
25])
2.
Actuate the hashtag button and star button on the tele-
phone
3.
Enter configuration command "72" at the telephone
You will hear the positive acknowledgement tone
