Configuration
5
DoorLine Slim DECT
25 / 56
5.3
Acknowledgement tones
During programming, you will be informed about the positive and negative ac-
knowledgement tones via the programming status.
Each note symbol corresponds to a beep:
neutral
Key input is expected
♪
positive
The programming has been accepted
♪♪
negative
The programming has not been accepted
♪♪♪♪♪♪♪♪
5.4
Saving and ending configuration
To end the configuration, it is sufficient to hang up the telephone receiver. The
device then detects the end of the call automatically and saves the changed
configuration.
5.5
Entry to configuration mode
For configuration, you have to call your DoorLine with a touch-tone dialling
telephone. The way you can call the DoorLine depends on the configuration of
your PBX system.
When the connection to the device has been established, you can start with
the configuration.
Notes
▪
Write down the corresponding codes for your own reference before you
start the configuration.
▪
In programming mode, the call duration is unlimited.
▪
If the programming is rejected by the device (negative acknowledgement
tone), you will have to repeat the incorrect programming step.
▪
If you entered the wrong PIN three times in succession, the connection is dis-
connected.
