Configuration via a telephone
7
DoorLine Pro EXCLUSIVE
93 / 112
7.11
Defining call duration to extension line
Definition of the duration of the door call to the extension line of your PBX sys-
tem.
Delivery status: 30 seconds
Possible values: 1 to 60 seconds.
Important:
The duration of the door call to the extension line can only be set if
call forwarding is programmed for a bell pushbutton. If call forwarding is not
programmed, the setting of the call duration is ineffective. When a bell push-
button is actuated, the set time for the call duration starts running immediately.
1.
Enter the configuration mode (see Entry to configuration
mode [
86])
2.
Actuate the hashtag button and star button on the tele-
phone
3.
Enter configuration command "08" at the telephone
As confirmation, you will hear a neutral acknowledgement
tone
4.
Enter call duration with digits 01, ... 60 (in steps of one
second).
The input must have two digits
Finally, you will hear the acknowledgement tone
