9
MENU
OK/Z
Please note
The system will display automatically on
SYSTEM row i.e. BG, L, I, DK depending
the receiving broadcasting system of the
country. In some countries the broadcasting
system can be both in BG/DK or BG/LL´.
Only the TV sets produced with Pal Secam
BG/DK or Pal Secam BG/LL´ systems can
receive both BG/DK or BG/LL´ broadcasts.
In this case the user can select the required
SYSTEM using
Volume up/down
buttons.
the TV will exit the menu system.
Please note
If you do not press any buttons for 15 seconds
before the search continues.
As Autoprogram stores a channel
Manual tuning
If you want to tune manually:
SETUP
OK/Z
OK/Z
countries will appear. Select
the desired country using
Program
and
Volume
buttons.
Use the Program down button to
select AUTOPROGRAM and
the OK button. A list of
press
When you are sure the aerial is
connected properly press the
OK
button. Autoprogram will start.
AUTOPROGRAM will flash.
To cancel Autoprogram whist it is
working press the
Menu
button
it will appear briefly on the screen
repetitively.
Please note:
If auto sort fails to arrange the programs in
the required sequence please refer to program
organizing.
Your TV is now tuned and ready to use.
In the Setup menu select
PROGRAM NO using
the
Program down
button
and use the
Volume up
button to change the Program No
to 01.
Starting with Program 01, tune
in the first channel as follows:
Use the
Program down
button
to select SEARCH.
Press the
Volume up
or
Volume
down
button to start the tuning
search.
When the search finds a strong
channel signal it will stop
searching. The picture will appear.
Use the
Program down
button to
select PROGRAM NO.
Use the
Volume up/down
or numeric
buttons to select the desired
program number.
Use the
Program down
button to
select STORE. Press the
OK
button
and STORED will appear on the
STORE line.
You have now stored the first
channel.
Use the
Program up
button to
select again SEARCH and
continue the tuning procedure
until you have tuned in all the
programs you want or the
television can receive.
